Jump to content

Signature issue?


Recommended Posts

I don't know what the resolution is. Just tried to add it again and got this message:

"Sorry, that file is too wide or too high - please try again after resizing the image"

:noclue:

Only change I attempted to make was the large red text. But even with no text, just the image, it's a no go.

The board definitely no longer likes that image even though it seems like it's within specs. I sure see larger images in other signatures. Strange. I haven't attempted to post any other images in place of that one.

Link to comment
Share on other sites

I don't know what the resolution is. Just tried to add it again and got this message:

"Sorry, that file is too wide or too high - please try again after resizing the image"

:noclue:

Only change I attempted to make was the large red text. But even with no text, just the image, it's a no go.

The board definitely no longer likes that image even though it seems like it's within specs. I sure see larger images in other signatures. Strange. I haven't attempted to post any other images in place of that one.

Your sig is 400 x 87 pixels aka 5.556 x 1.208 inches with a resolution of 72 pixels per inch.

I just save your sig from your post and opened it in PhotoShop. :)

I don't know what else you have in there that may be causing you some issues. Is the restriction of sigs the total L x W or just the photo?

Good luck. :)

Link to comment
Share on other sites

  • 4 weeks later...

I made a smaller banner and it still won't let me put it up. It's under the pixel restrictions as well. UGH. Help?

Link to comment
Share on other sites

I made a smaller banner and it still won't let me put it up. It's under the pixel restrictions as well. UGH. Help?

Right now both of your banners are over the width limit (300 pixels). If you're only replacing one, that's what's going on. If you're trying to get rid of both and have the smaller on there instead, I'm not sure what the issue is.

Link to comment
Share on other sites

Right now both of your banners are over the width limit (300 pixels). If you're only replacing one, that's what's going on. If you're trying to get rid of both and have the smaller on there instead, I'm not sure what the issue is.

I am deleting both of the ones I have now for a 400X100ish smaller banner. It says it's over limit and I changed the quality as well to lower the size of the file.

Link to comment
Share on other sites

  • 2 months later...

I tried to change my signature (it is small, no images) and I keep receiving this message:

[#10211] You may only use up to lines of text in your signature.

Even when I try to erase the signature and entering nothing and click Save Changes, I receive the same message.

Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.